Concrete Company in Scotts Hill NC

Yes. A boat pad needs to be flat, strong and big enough for the trailer plus room to walk around it. We pour it five or six inches thick with steel, and thicker where tires roll and turn. We compact a stone base and slope the pad so water runs off.

We also plan the approach, so you can back in without damaging a fence or a tree. Check HOA and county rules first, since pads can count as added hard surface. See concrete boat and RV pads for more. A written estimate lists the size, the thickness and the price.

Tell us the length and weight of your boat and trailer, and a concrete company in Scotts Hill NC can plan the pad from the first call. Ask us to review your survey or plat, so we know where the setbacks and easements run before we draw the pad on the ground.

We cover the steel with enough concrete so salt has a hard time reaching it. We use a mix made for outdoor use and seal the surface with a product that blocks salt and water. Rinsing the slab with fresh water now and then helps a lot, and so does cleaning off green algae before it takes hold.

Sealer wears off, so plan to reapply every two or three years. Small cracks should be filled early. See concrete staining and sealing. We leave simple care notes after the job and can come back to reseal when it is time.

Rinse the pad with fresh water after salt water use, since regular rinsing helps concrete near the waterway last longer. Tell us about the dock, the bulkhead and the path to the water, and a concrete company in Scotts Hill NC will plan the walk and the pad so they connect safely and drain properly.

A light colored, textured finish works well. A broom finish is simple and grippy. Exposed aggregate has a natural stone look that suits waterway homes, and it hides sand and stains. Color and stain can add warmth, and a good sealer protects it.

Avoid smooth, glossy finishes where wet feet and gear walk. We bring samples and test them in the sun with you. See concrete patio installation and exposed aggregate concrete. We also slope the patio so water runs away fast, which keeps algae from growing in corners.

A concrete company in Scotts Hill NC should explain the rules on hard surface, and we tell you what we know and who to ask. A concrete company in Scotts Hill NC should ask about pine roots and low spots, and we probe the ground in a few places to see how firm the sand really is under the grass.

Often there are. Rules on stormwater, hard surface and work near the water can apply, and HOAs may add limits. Coastal rules can also affect new pads and walks close to the shoreline or the marsh. Because rules change by property, we do not guess.

Tell us your address and plan, and we explain what usually applies and which office to ask. We also call NC811 before digging. If you need a sketch for an approval, we can prepare one. Getting approval first avoids stop work orders and costly changes. A short call to the right office can save weeks of trouble.

Photos of the lot and the trees help us plan the slab before we visit, especially where pines are close. Ask us how we keep rinse water and runoff away from the waterway, since good drainage is part of every pad and patio we plan near the Intracoastal Waterway in this area.

Yes, with care. Pines drop needles and roots, and their stumps rot into voids if left under a slab. We clear roots and stumps in the pour area, remove loose sand and compact crushed stone in layers. Then we add steel and pour a slab sized for the use.

Sandy soil drains well, but it can wash out, so we plan the slope and the edges. We also keep pine trunks away from the slab when we can. At the estimate, we walk the lot and show you the plan. We tell you plainly what the ground needs and what it costs.

Sample boards in the sun show how a finish will look near the water, and we bring them to every estimate. Share a few photos of the lot from the street and from the water side, and a concrete company in Scotts Hill NC can plan the access and the pour before the first visit.

Usually within a few days. Scotts Hill is a drive north of our shop in the 28409 area, and we serve it regularly. Call us any day from 5 AM to 10 PM, give us your address and a few landmarks and describe the work. We set a time to visit, measure and talk about the plan.

After the visit, you get a written estimate with the work, the thickness, the finish and the price. If you have a deadline, like a boating weekend, tell us when you call. We plan backward from your date and tell you what is realistic.

A short note about your boating weekends helps us plan the pour so the pad is ready when you are. Tell us about your boating season and any guests you expect, and we will schedule the pour and the cure so the pad is ready before your first trip.